Microstructure and dielectric properties of BaxSr1-xTiO3 ceramics prepared by direct current arc discharge technique

ISL OpenIR > 青海盐湖研究所知识仓储

	Microstructure and dielectric properties of BaxSr1-xTiO3 ceramics prepared by direct current arc discharge technique
	Yao, Ying1 ; Li, Shuangbin 1,2; Jia, Yongzhong1 ; Xie, Shaolei1
	2015-12-05
发表期刊	JOURNAL OF ALLOYS AND COMPOUNDS
卷号	651 页码:273-277
关键词	Ceramics Barium Strontium Titanate Sintering Dielectric Properties
摘要	A direct current arc discharge technique has been employed to prepare BaxSr1-xTiO3 ceramics. The effect of sintering temperature and dwell time on the crystalline structure, phase and morphology evolution are briefly studied. The results show that with the increase of sintering temperature and dwell time, the structure becomes more homogeneous, but a small amount of BaTi4O9 phase can still be traced. We also present data on dielectric permittivity measurements made in the temperature range from -165 to 200 degrees C with frequencies from 0.1 to 100 kHz. Except for Curie temperature (T-c) for BaxSr1-xTiO3 ceramics, a new phase transition for BaTi4O9 can be detected. (C) 2015 Elsevier B.V. All rights reserved.
语种	英语
引用统计
文献类型	期刊论文
条目标识符	http://ir.isl.ac.cn/handle/363002/6161
专题	青海盐湖研究所知识仓储盐湖资源综合利用工程技术中心
作者单位	1.Chinese Acad Sci, Qinghai Inst Salt Lakes, Key Lab Salt Lake Resources & Chem, Xining 810008, Peoples R China 2.Univ Chinese Acad Sci, Beijing 100049, Peoples R China
推荐引用方式 GB/T 7714	Yao, Ying,Li, Shuangbin,Jia, Yongzhong,et al. Microstructure and dielectric properties of BaxSr1-xTiO3 ceramics prepared by direct current arc discharge technique[J]. JOURNAL OF ALLOYS AND COMPOUNDS,2015,651:273-277.
APA	Yao, Ying,Li, Shuangbin,Jia, Yongzhong,&Xie, Shaolei.(2015).Microstructure and dielectric properties of BaxSr1-xTiO3 ceramics prepared by direct current arc discharge technique.JOURNAL OF ALLOYS AND COMPOUNDS,651,273-277.
MLA	Yao, Ying,et al."Microstructure and dielectric properties of BaxSr1-xTiO3 ceramics prepared by direct current arc discharge technique".JOURNAL OF ALLOYS AND COMPOUNDS 651(2015):273-277.